You can order directly on our website by navigating to shop and selecting your preferred bottle size, plan and quantity. Simply add to cart and follow our easy checkout process.

If you prefer, you can also reach us by phone at 954-451-4005

or email us at

Pure Health Alkaline Water  recommends that you use the instructions below to dissolve mineral deposits, sanitize, and deodorize your dispenser every 3-4 months. Time Required: 30 minutes Need: (2) tablespoon regular bleach or (2) cups of distilled white vinegar, (1) Empty 5-gallon bottle, (1) 2-gallon bucket and a Phillips head screwdriver.

1. Turn energy-saving switches to OFF.
2. Unplug the power cord from the wall outlet.
3. Remove the water bottle.
4. Move appliance away from the wall to gain access to the back.
5. Remove remaining water from reservoirs by dispensing from the hot and cold taps into a pitcher or bucket.
6. Remove the cap from a spare empty 5-gallon bottle. Pour the bleach (2 tbsp.) or vinegar (2 cups) and hot tap water (2 Gallons) into the empty bottle.
7. Apply the cleaning bottle to the dispenser.
8. Plug the power cord back into the wall outlet and turn the dispenser back on.
9. Allow the cleaning solution to fill the reservoirs.
10. Turn the switches back to off and unplug the power cord from the wall outlet.
11. Wait 10 minutes then drain the water from the reservoirs as described in step 5.
12. Rinse the bottle and fill with only hot tap water and apply it to the dispenser following (steps 8-9).
13. Place a two-gallon bucket in the back of the appliance and remove the drain plug, while also flushing water through the taps (step 5).
14. Replace the silicone plug and drain cap.
15. Return the unit to its location, install a fresh water bottle, plug the power cord into the grounded wall outlet and turn the energy-saving switch ON.

Click Here.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.